H-gas | high calorific fuel

cooling load [ heat load | refrigeration duty | refrigeration load | refrigeration requirement | cold requirement | cold need ]

asphyxia by | choked on | suffocation by | food [including bone or seed] | aspiration and inhalation of food [any] (into respiratory tract) NOS compression of trachea | interruption of respiration | obstruction of respiration | by food in oesophagus | obstruction of pharynx by food (bolus)

L-gas | low calorific fuel

high BTU gas | high-BTU gas

high-calorific value gas [ high-Btu gas | high Btu pipeline gas | high joule value gas ]

thermal inertia

heat load

gross calorific value [ GCV | high heating value | gross heating value | higher calorific value | gross energy value | higher heating value | upper heating value | gross specific energy | upper calorific value ]

Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products

‘bin-specific coefficient of performance’ (COPbin(Tj )) or ‘bin-specific primary energy ratio’ (PERbin(Tj )) means the coefficient of performance of the heat pump space heater or heat pump combination heater using electricity, or primary energy ratio of the heat pump space heater or heat pump combination heater using fuel specific for every bin in a season, derived from the part load for heating, declared capacity for heating and declared coefficient of performance for specified bins and calculated for other bins by interpolation or extrapolation, corrected where necessary by the degradation coefficient;

‘bin-specific coefficient of performance’ (COPbin(Tj)) or ‘bin-specific primary energy ratio’ (PERbin(Tj)) means the coefficient of performance of the heat pump space heater or heat pump combination heater using electricity, or primary energy ratio of the heat pump space heater or heat pump combination heater using fuel specific for every bin in a season, derived from the part load for heating, declared capacity for heating and declared coefficient of performance for specified bins and calculated for other bins by interpolation or extrapolation, corrected where necessary by the degradation coefficient.

Heat loads shall include existing heat loads, such as an industrial installation or an existing district heating system, and also, in urban areas, the heat load and costs that would exist if a group of buildings or part of a city were provided with and/or connected into a new district heating network.