75 for evaporative system monitors, secondary air system monitors, and monitors utilising a denominator incremented in accordance with point 3.3.2 points (a), (b) or (c) of Appendix 1 to Annex XI (e.g. cold start monitors, air conditioning system monitors, etc.); or

The limited frequency of driving situations during which monitors of the boost control system or monitors requiring a cold start can be operated requires special performance requirements for these monitors.

These facilities are to be constructed of corrosion-resistant materials, be easy to clean and have an adequate supply of hot and cold water.

If EN 50242: 1998 is used, the following modifications shall apply: the tests shall be carried out at 55 °C ± 2 °C with cold pre-wash without detergent; the machine used in the test shall be connected to cold water and must hold 12 place settings with a washing index of between 3,35 and 3,75; the machine's drying programme shall be used, but only the cleanliness of the dishes shall be assessed; a weak acidic rinsing agent in accordance with the standard (formula III) shall be used; the rinsing agent setting shall be between 2 and 3; the dosage of dishwashing detergent shall be as recommended by the manufacturer; three attempts shal ...[+++]l be carried out at a water hardness in accordance with the standard; an attempt consists of five washes where the result is read after the fifth wash without the dishes being cleaned between the washes; the result shall be better than or identical to the reference detergent after the fifth wash; recipe for the reference detergent (Detergent B IEC 436) and rinsing agent (formula III), see Appendix B in the standard EN 50242: 1998 (the tensides are to be stored in a cool place in watertight containers not exceeding 1 kg and are to be used within three months).

If EN 50242: 1998 is used, the following modifications shall apply: the tests shall be carried out at 55 °C ± 2 °C with cold pre-wash without detergent; the machine used in the test shall be connected to cold water and must hold 12 place settings with a washing index of between 3,35 and 3,75; the machine's drying programme shall be used, but only the cleanliness of the dishes shall be assessed; a weak acidic rinsing agent in accordance with the standard (formula III) shall be used; the rinsing agent setting shall be between 2 and 3; the dosage of dishwashing detergent shall be as recommended by the manufacturer; three attempts shal ...[+++]l be carried out at a water hardness in accordance with the standard; an attempt consists of five washes where the result is read after the fifth wash without the dishes being cleaned between the washes; the result shall be better than or identical to the reference detergent after the fifth wash; recipe for the reference detergent (Detergent B IEC 436) and rinsing agent (formula III), see Appendix B in the standard EN 50242: 1998 (the tensides are to be stored in a cool place in watertight containers not exceeding 1 kg and are to be used within three months).

"(f) metered dose inhalers and delivery mechanisms containing chlorofluorcarbons for hermetically sealed devices for implantation in the human body for delivery of measured doses of medication which, under Article 4(1), may be given a temporary authorisation in accordance with the procedure referred to in Article 18(2)".