(6) In the case of each adjustable seat belt anchorage for the upper end of an upper torso restraint, the mid-point of the range of adjustment of the anchorage or the position that is suitable for a 50th percentile adult male, if that position is specified in the owner’s manual, shall be located within the range referred to in subsection (5).

(5) In the case of each non-adjustable seat belt anchorage for the upper end of an upper torso restraint, the intersection of the longitudinal centreline of the bolt hole and the surface of the mounting structure or, in designs using another means of attachment to the vehicle structure, the centroid of the means shall be located within the range indicated in section 6.1 of SAE Recommended Practice J383, Motor Vehicle Seat Belt Anchorages — Design Recommendations (June 1995), with reference to an H-point template described in section 4.1 of SAE Standard J826, Devices for Use in Defining and Measuring Vehicle Seating Accommodation (July 19 ...[+++]95), where

(12) When the vehicle seat is placed in any position, and the seat back is placed in the manufacturer’s nominal design riding position and any adjustable seat belt anchorage is placed in the manufacturer’s nominal design position for a 50th percentile adult male occupant, every upper torso restraint shall be adjustable to fit any occupant whose dimensions range from those of a 5th percentile adult female to those of a 95th percentile adult male.

When the seat is adjustable in height, it shall be adjusted to its lowest position.

Nominal height (in running order) ( ) on intended chassis type(s) (for suspensions adjustable for height, indicate normal running position):

Height (in running order) ( ) (for suspensions adjustable for height, indicate normal running position):