The space for mounting the plate must be visible within a space bordered by two dihedrals: one with a horizontal edge defined by two planes passing through the upper and lower horizontal edges of the space for mounting the plate, the angles of which in relation to the horizontal are shown in Figure 1; the other with a perceptibly vertical edge defined by two planes passing through each side of the plate, the angles of which in relation to the median longitudinal plane of the vehicle are shown in Figure 2.

57. Acknowledges the budget difficulties that the Commission faces when allocating funds for multilateral purposes; requests the Commission to clarify the needs for funding horizontal trade-related assistance initiatives, including bilateral, regional and multilateral initiatives, such as the Integrated Framework (IF); stresses, in this regard, that it proposed a new budget line, which has already been included in the 2007 EU budget, to fund multilateral programmes and initiatives in the field of trade-related assistance that offer added value to the Community's geographical programmes; stresses that the new budget line gives it great ...[+++]er control over expenditure relating to multilateral programmes and initiatives in the field of trade-related assistance, thus increasing the visibility and transparency of this kind of spending; requests the Commission to complete, as soon as possible, a funds assessment for horizontal trade-related assistance initiatives, including the IF;

It is essential to ensure complementarity and a horizontal approach in all Community, national, regional and local actions with a strong intercultural dialogue dimension, given that the European Year of Intercultural Dialogue will help to raise their profile and increase their coherence.

integrating the horizontal approach proposed by the Commission to vertical themes and activities, and promoting the visibility of such an approach.

6.1. The space for mounting the plate must be visible within a space bordered by two dihedrals: one with a horizontal edge defined by two planes passing through the upper and lower horizontal edges of the space for mounting the plate, the angles of which in relation to the horizontal are shown in Figure 1; the other with a perceptibly vertical edge defined by two planes passing through each side of the plate, the angles of which in relation to the median longitudinal plane of the vehicle are shown in Figure 2.

If it is impossible to observe the above position and visibility requirements, four reflex reflectors may be fitted in accordance with the following installation specifications: 4.14.5.2.1 Two reflex reflectors must keep within the maximum height of 900 mm above the ground, observe a distance between the interior edges of at least 400 mm and have a vertical angle of visibility above the horizontal of 15º.