Boost Your Productivity !Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Alemite
Buse de sablage
Embout
Embout de bielle
Embout de bougie
Embout de bougie pour antiparasitage
Embout de graissage
Embout de lubrification
Embout de tuyau de sable
Embout de tuyau de sable flexible
Embout de tuyau sableur
Embout de visseuse
Embout du tuyau de sable
Embout fin
Embout graisseur
Embout pour visseuse
Embout à rotule
Graisseur
Lame fine
Porte-embout
Porte-embouts
Téton de graissage
Zerk
Zert

Translation of "Embout fin " (French → English) :

TERMINOLOGY
see also In-Context Translations below
lame fine | embout fin

fine tip
médecine > instrument et appareillage dentaires
médecine > instrument et appareillage dentaires


porte-embout | porte-embouts

bit holder
IATE - Technology and technical regulations
IATE - Technology and technical regulations


embout de bougie | embout de bougie pour antiparasitage

sparking plug suppressor
IATE - Electronics and electrical engineering
IATE - Electronics and electrical engineering


embout de tuyau de sable | embout de tuyau sableur

sand nozzle | sanding nozzle
IATE - TRANSPORT | Land transport | Mechanical engineering
IATE - TRANSPORT | Land transport | Mechanical engineering


méthode embout/embout [ mesure embout/embout ]

end to end measurement
Tuyauterie et raccords
Pipes and Fittings


embout de tuyau de sable flexible [ embout du tuyau de sable | embout de tuyau sableur | buse de sablage ]

sanding nozzle [ sand nozzle ]
Machines | Roulement et suspension (Chemins de fer) | Traction (Chemins de fer)
Machinery | Rolling and Suspension Components (Railroad) | Traction (Rail)


mesure axe/embout [ méthode axe/embout | mesure embout/axe ]

center to end measurement [ end to center measurement ]
Tuyauterie et raccords
Pipes and Fittings


embout de visseuse | embout pour visseuse | embout

screwdriver bit | bit
outillage > outil d'assemblage
outillage > outil d'assemblage


embout de graissage | embout de lubrification | graisseur | téton de graissage | embout graisseur | Zerk | Zert | Alemite

grease fitting | grease nipple | Zerk | Zert | Alemite
génie mécanique > organe mécanique | génie mécanique > lubrification | industrie automobile
génie mécanique > organe mécanique | génie mécanique > lubrification | industrie automobile


embout à rotule (1) | embout de bielle (2)

rod end
Aviation militaire (Défense des états) | Moyens de transport (Transports)
Defence & warfare | Transport
IN-CONTEXT TRANSLATIONS
5. Les câbles de liaison de l’appareil de contrôle à l’émetteur d’impulsions doivent être protégés par une gaine continue en acier inoxydable recouverte d’un enrobage plastique et terminée par des embouts sertis, sauf lorsqu’une protection équivalente contre toute manipulation est garantie par d’autres méthodes (par exemple par contrôle électronique, tel qu’un encryptage des signaux) capables de détecter la présence de tout dispositif qui ne serait pas nécessaire au fonctionnement précis de l’appareil de contrôle et qui est destiné à empêcher le bon fonctionnement de cet appareil par court-circuit, interruption ou modification des donnée ...[+++]

5. The cables connecting the recording equipment to the transmitter must be protected by a continuous plastic-coated rust-protected steel sheath with crimped ends, except where an equivalent protection against manipulation is guaranteed by other means (for example by electronic monitoring such as signal encryption) capable of detecting the presence of any device which is unnecessary for the correct operation of the recording equipment and the purpose of which is to prevent the accurate operation of the recording equipment by short circuiting or interruption or by modification of the electronic data from the speed and distance sensor. A j ...[+++]


les rouleaux de tabac remplis d’un mélange battu et munis d’une cape extérieure, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant, mais non l’embout dans le cas des cigares avec embout, et d’une souscape, toutes deux en tabac reconstitué, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 1,2 gramme et que la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l’axe longitudinal du cigare;

rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar covering the product in full, including, where appropriate, the filter but not, in the case of tipped cigars, the tip, and a binder, both being of reconstituted tobacco, where the unit weight, not including filter or mouthpiece, is not less than 1,2 g and where the wrapper is fitted in spiral form with an acute angle of at least 30° to the longitudinal axis of the cigar;


les rouleaux de tabac remplis d’un mélange battu et munis d’une cape extérieure en tabac reconstitué, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant, mais non l’embout dans le cas des cigares avec embout, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 2,3 grammes et égale ou inférieure à 10 grammes et que leur circonférence est égale ou supérieure à 34 millimètres sur au moins un tiers de leur longueur.

rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar, of reconstituted tobacco, covering the product in full, including, where appropriate, the filter but not, in the case of tipped cigars, the tip, where the unit weight, not including filter or mouthpiece, is not less than 2,3 g and not more than 10 g, and the circumference over at least one third of the length is not less than 34 mm.


les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure en tabac reconstitué, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant — mais non l'embout dans le cas des cigares avec embout —, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 2,3 grammes et égale ou inférieure à 10 grammes et que leur circonférence est égale ou supérieure à 34 millimètres sur au moins un tiers de leur longueur.

rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar, of reconstituted tobacco, covering the product in full, including, where appropriate, the filter but not, in the case of tipped cigars, the tip, where the unit weight, not including filter or mouthpiece, is not less than 2,3 g and not more than 10 g, and the circumference over at least one third of the length is not less than 34 mm.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure en tabac reconstitué, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant - mais non l'embout dans le cas des cigares avec embout -, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 2,3 grammes et que leur circonférence est égale ou supérieure à 34 millimètres sur au moins un tiers de leur longueur".

4. Rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar, of reconstituted tobacco, covering the product in full, including where appropriate the filter but not, in the case of tipped cigars, the tip, where the unit weight, not including filter or mouth-piece, is not less than 2.3g and the circumference over at least one third of the length is not less than 34 mm.


les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant - mais non l'embout dans le cas des cigares avec embout -, et d'une sous-cape, toutes deux en tabac reconstitué, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 1,2 gramme et que la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l'axe longitudinal du cigare;

3. Rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar covering the product in full, including where appropriate the filter but not in the case of tipped cigars, the tip , and a binder, both being of reconstituted tobacco, where the unit weight, not including filter or mouth-piece, is not less than 1,2 g and where the wrapper is fitted in spiral form with an acute angle of at least 30° to the longitudinal axis of the cigar;


4) les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure en tabac reconstitué, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant - mais non l'embout dans le cas des cigares avec embout -, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 2,3 grammes et que leur circonférence est égale ou supérieure à 34 millimètres sur au moins un tiers de leur longueur".

4. rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar, of reconstituted tobacco, covering the product in full, including where appropriate the filter but not, in the case of tipped cigars, the tip, where the unit weight, not including filter or mouth-piece, is not less than 2,3 g and the circumference over at least one third of the length is not less than 34 mm".


1) À l'article 3, les points 3) et 4) sont remplacés par le texte suivant: "3) les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant - mais non l'embout dans le cas des cigares avec embout -, et d'une sous-cape, toutes deux en tabac reconstitué, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 1,2 gramme et que la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l'axe longitudinal du cigare;

1. Article 3, points 3 and 4, shall be replaced by the following: "3. rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar covering the product in full, including where appropriate the filter but not in the case of tipped cigars, the tip, and a binder, both being of reconstituted tobacco, where the unit weight, not including filter or mouth-piece, is not less than 1,2 g and where the wrapper is fitted in spiral form with an acute angle of at least 30° to the longitudinal axis of the cigar;


(4) les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure en tabac reconstitué, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant – mais non l'embout dans le cas des cigares avec embout , lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 2,3 grammes et que leur circonférence est égale ou supérieure à 34 millimètres sur au moins un tiers de leur longueur".

(4) Rolls of tobacco with a threshed blend filter and with an outer wrapper of the normal colour of a cigar, of reconstituted tobacco, covering the product in full, including where appropriate the filter but not, in the case of tipped cigars, the tip, where the unit weight, not including filter or mouth-piece, is not less than 2,3 g and the circumference over at least one third of the length is not less than 34 mm".


"(3) les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant mais non l'embout dans le cas des cigares avec embout , et d'une sous-cape, toutes deux en tabac reconstitué, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 1,2 gramme et que la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l'axe longitudinal du cigare;

"(3) Rolls of tobacco with a threshed blend filter and with an outer wrapper of the normal colour of a cigar covering the product in full, including where appropriate the filter but not in the case of tipped cigars, the tip, and a binder, both being of reconstituted tobacco, where the unit weight, not including filter or mouth-piece, is not less than 1,2 g and where the wrapper is fitted in spiral form with an acute angle of a least 30° to the longitudinal axis of the cigar;




www.wordscope.com (v4.0.br.77)

Embout fin

Date index:2023-01-03 -

Pour agences de traduction et traducteurs - For translation agencies & translators

Paris - Brussels - Montreal - Genève - Luxembourg - Madrid

Wordscope - Professional computer-assisted translation tools (CAT tools)