round corner square

square with rounded corners

half-round fillet wing

rounded-edge angle iron

corner radius | nose radius | rounded corner

round corners

bullnose | jamb brick

square | square pattern

(ii) Microscopical, — when suitably mounted and examined under the microscope, thyroid shows the following: numerous smooth to striated hyaline fragments of colloids, of angular to irregular shape, that are colourless to pale yellow in water mounts, brown in Mallory’s stain and pink in solution of eosin, some of these fragments containing granules, minute vacuoles, crystalloidal bodies and cells; numerous irregular fragments of follicular epithelium staining brown with Mallory’s stain, the individual cells more or less polygonal to rounded-angular or irregularly cuboidal, often with prominent nuclei staining dark blue, their cytoplasm p ...[+++]urplish with Delafield’s solution of haematoxylin; slender glistening segments of capillaries of closely undulate outline; numerous slender segments of neuraxons; numerous aggregates of particles of intercellular substance and slender, mostly straight connective tissue fibres staining blue to greenish blue with a mixture of Mallory’s stain and solution of phosphotungstic acid, the bundles of fibres often appearing reddish in Mallory’s stain; few glistening fragments of blood vessels with serrated or crenated ends as viewed in water mounts; and

(b) “footprint” means the result of the product of the average width, measured in inches and rounded to the nearest tenth of an inch, of the lateral distance between the centrelines of the front and rear base tires at ground level, multiplied by the longitudinal distance between the front and rear wheel centrelines, measured in inches and rounded to the nearest tenth of an inch, divided by 144 and rounded to the nearest tenth of a square foot.

3. If a conversion of board feet to cubic metres or to square metres is required for the purposes of this Act, the conversion is to be made on a nominal measurement basis and shall not be rounded up to the nearest cubic metre or square metre.

3. If a conversion of board feet to cubic metres or to square metres is required for the purposes of this Act, the conversion is to be made on a nominal measurement basis and shall not be rounded up to the nearest cubic metre or square metre.