(a) machine tools that can be used as measuring machines are included if they meet or exceed the criteria specified for the machine tool function or the measuring machine function;

(3) Engine rooms and other machinery spaces must be provided, wherever practicable, with soundproof centralized control rooms for engine-room personnel.

Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery (including heat-shrink wrapping machinery); machinery for aerating beverages

EUROPA - EU law and publications - EUR-Lex - EUR-Lex - 32006L0042 - EN - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance) // DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL // of 17 May 2006 // on machinery, and amending Directive 95/16/EC (recast) // Essential health and safety requirements relating to the the design and construction of machinery // Declarations // CE marking // Categories of machinery to which one of the procedures referred to in Article 12(3) and (4) must be applied // Indicative list of ...[+++] the safety components referred to in Article 2(c) // Assembly instructions for partly completed machinery // Assessment of conformity with internal checks on the manufacture of machinery // EC type-examination // Full quality assurance // Minimum criteria to be taken into account by Member States for the notification of bodies

Foodstuffs machinery, machinery for cosmetics or pharmaceutical products, hand-held and/or hand-guided machinery, portable fixing and other impact machinery, machinery for working wood and material with similar physical characteristics must meet all the essential health and safety requirements described in this chapter (see General Principles, point 4).

Before placing a machine on the Market, the manufacturer, or his authorized representative established in the Community, in order to certify the conformity of machinery, shall draw up documentation comprising: A technical construction file composed of: - an overall drawing of the machinery together with the drawings of the control circuits; - full detailed drawings, accompagnied by any calculation notes, test results, etc. required to construct the machinery; - a description of the methods adopted to eliminate hazards presented by the machinery; - as well as technical reports or certificates obtained from a competent body, and - a cop ...[+++]y of the instruction handbook for the machinery.