Manufacturers : designers and manufacturers of aircraft, engines, propellers and aircraft parts and appliances, and their respective associations ; designers and manufacturers of air traffic management (ATM) systems and constituents; designers and manufacturers of systems and constituents for air navigation services (ANS); designers and manufacturers of systems and equipments used on the air side of aerodromes

1. Manufacturers: designers and manufacturers of aircraft, engines, propellers and aircraft parts and appliances, and their respective associations; designers and manufacturers of Air Traffic Management (ATM) systems and constituents; designers and manufacturers of systems and constituents for Air Navigation Services (ANS); designers and manufacturers of systems and equipments used on the air side of aerodromes

1. Manufacturers: designers and manufacturers of aircraft, engines, propellers and aircraft parts and appliances; designers and manufacturers of Air Traffic Management (ATM) systems and constituents; designers and manufacturers of systems and constituents for Air Navigation Services (ANS); designers and manufacturers of systems and equipments used on the air side of aerodromes

Therefore, with regard to the manufacture of active pharmaceutical ingredients in third countries intended for medicinal products marketed in the Union, it should be ensured through repeated, mandatory inspections and enforcement by the Union’s competent authorities or by authorities with mutual recognition agreements in force covering active pharmaceutical ingredients, that manufacture is taking place in compliance with both of the above requirements.Pharmaceutical excipients, other than active pharmaceutical ingredients, used in medicinal product manufacturing should be subject to appropriate controls by the manufacturing authorisation holder such that the excipients are checked and verified by the manufacturing authorisation holder to be ...[+++] suitable for use in the production of medicinal products in accordance with good manufacturing practices and that the verification provides for an adequate level of protection of public health.

1. For the purpose of identifying and tracing each assembled firearm, the Member States shall, at the time of manufacture of each firearm, either require unique marking including the name or trademark of the manufacturer, the country or place of manufacture, the serial number and the year of manufacture (if not part of the serial number), as laid down in the Convention of 1 July 1969 on Reciprocal Recognition of Proofmarks on Small Arms (CIP), or maintain any alternative unique user-friendly marking with a number or alphanumeric code, permitting ready identification by all States of the country of manufacture.

6. Integrated chemical installations, that is to say those installations for the manufacture on an industrial scale of substances using chemical conversion processes, in which several units are juxtaposed and are functionally linked to one another and which are: (i) for the production of basic organic chemicals; (ii) for the production of basic inorganic chemicals; (iii) for the production of phosphorous, nitrogen or potassium-based fertilizers (simple or compound fertilizers); (iv) for the production of basic plant health products and of biocides; (v) for the production of basic pharmaceutical products using a chemical or biological ...[+++] process; (vi) for the production of explosives.