Boost Your Productivity !Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Clou à deux têtes
Clou à deux têtes superposées
Clou à double tête
Pompe alternative à deux corps
Pompe alternative à deux têtes
Rivet affleurant
Rivet noyé
Rivet tubulaire tête bombée deux pièces
Rivet tubulaire tête plate deux pièces
Rivet à deux têtes
Rivet à tête conique tronqué avec collet
Rivet à tête cylindrique
Rivet à tête cylindrique à dépouille
Rivet à tête fraisée
Rivet à tête noyée
Rivet à tête tronconique

Translation of "rivet à deux têtes " (French → English) :

TERMINOLOGY
see also In-Context Translations below
rivet à deux têtes

double ended rivet
génie mécanique > organe d'assemblage
génie mécanique > organe d'assemblage


rivet à tête cylindrique [ rivet à tête tronconique | rivet à tête cylindrique à dépouille ]

pan head rivet [ cylindrical head rivet ]
Aérotechnique et maintenance | Éléments d'assemblage (Composants mécaniques)
Aeronautical Engineering and Maintenance | Joining Elements (Mechanical Components)


rivet à tête fraisée [ rivet à tête noyée | rivet affleurant ]

flush rivet [ flush-head rivet | countersunk head rivet | countersunk rivet | bullhead rivet ]
Aérotechnique et maintenance | Éléments d'assemblage (Composants mécaniques)
Aeronautical Engineering and Maintenance | Joining Elements (Mechanical Components)


clou à deux têtes [ clou à double tête | clou à deux têtes superposées ]

double-headed nail [ duplex-headed nail | form nail | scaffold nail ]
Clouterie et visserie
Metal Fasteners


pompe alternative à deux corps | pompe alternative à deux têtes

dual reciprocating piston pump
chimie > chromatographie
chimie > chromatographie


rivet à tête conique tronqué avec collet

cone head with tapered neck rivet
génie mécanique > organe d'assemblage
génie mécanique > organe d'assemblage


Définition: Trouble caractérisé par des mouvements intentionnels, répétitifs, stéréotypés, dépourvus de finalité (et souvent rythmés), non lié à un trouble psychiatrique ou neurologique identifié. Lorsque ces mouvements surviennent dans le cadre d'un autre trouble, seul ce dernier doit être noté. Ces mouvements peuvent ne pas avoir de composante automutilatrice; ils comprennent: un balancement du corps, un balancement de la tête, le fait de s'arracher les cheveux, de se tordre les cheveux, de claquer des doigts et de battre des mains. Les comportements stéréotypés auto-mutilateurs comprennent: le fait de se cogner la tête, de se gifler, ...[+++]

Definition: Voluntary, repetitive, stereotyped, nonfunctional (and often rhythmic) movements that do not form part of any recognized psychiatric or neurological condition. When such movements occur as symptoms of some other disorder, only the overall disorder should be recorded. The movements that are of a non self-injurious variety include: body-rocking, head-rocking, hair-plucking, hair-twisting, finger-flicking mannerisms, and hand-flapping. Stereotyped self-injurious behaviour includes repetitive head-banging, face-slapping, eye-poking, and biting of hands, lips or other body parts. All the stereotyped movement disorders occur most frequently in association with mental retardation (when this is the case, ...[+++]
WORLD HEALTH ORGANIZATION ICD-10: F98.4
WORLD HEALTH ORGANIZATION ICD-10: F98.4


rivet à tête fraisée | rivet à tête noyée | rivet noyé

countersunk rivet | flush countersunk rivet
IATE - Mechanical engineering
IATE - Mechanical engineering


rivet tubulaire tête plate deux pièces

sflat head plit tubular rivet
IATE - Technology and technical regulations | Mechanical engineering
IATE - Technology and technical regulations | Mechanical engineering


rivet tubulaire tête bombée deux pièces

mushroom head split tubular rivet
IATE - Technology and technical regulations | Mechanical engineering
IATE - Technology and technical regulations | Mechanical engineering
IN-CONTEXT TRANSLATIONS
L'Eurogroupe pourrait alors décider également d'élire le ministre à sa tête pour deux mandats consécutifs, afin d'aligner les deux mandats.

The Eurogroup could then also decide to elect the Minister as its President for two consecutive terms in order to align both mandates.


La Commission européenne nomme deux nouvelles directrices générales à la tête des DG Informatique et Interprétation ainsi que trois directeurs généraux adjoints

Today, the European Commission appointed Ms Gertrud Ingestad as Director-General of its department for Informatics (DG DIGIT) and Ms Florika Fink-Hooijer as Director-General of its department for Interpretation (DG SCIC).


La Commission européenne nomme deux nouvelles directrices générales à la tête des DG Informatique et Interprétation ainsi que trois directeurs généraux adjoints // Bruxelles, le 12 avril 2016

European Commission appoints new Directors-General to lead its departments for Informatics and for Interpretation, names three Deputy Directors-General // Brussels, 12 April 2016


La face externe du dispositif doit être lisse, essentiellement plane ou ondulée horizontalement et, autant que possible, continue de l’avant vers l’arrière; les parties adjacentes peuvent toutefois se chevaucher, à condition que l’arête de chevauchement soit tournée vers l’arrière ou vers le bas, ou un espace libre de 25 mm de long au plus peut subsister, à condition que la partie arrière ne soit pas en saillie, vers l’extérieur, par rapport à la partie avant; les têtes arrondies des boulons ou des rivets ...[+++]

The outer surface of the device shall be smooth, substantially flat or horizontally corrugated and so far as possible continuous from front to rear; adjacent parts may however overlap, provided that the overlapping edge faces rearwards or downwards, or a gap of not more than 25 mm measured longitudinally may be left, provided that the rearward part does not protrude outboard of the forward part; domed heads of bolts or rivets may protrude beyond the surface to a distance not exceeding 10 mm and other parts may protrude to the same extent provided that they are smooth and similarly rounded; all external edges and corners shall be round ...[+++]


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
Par ailleurs, plusieurs importateurs, appuyés par une association, ont réitéré leur demande de restreindre l’enquête à deux codes NC, à savoir 7318 15 61 (vis avec tête à six pans creux en aciers inoxydables) et 7318 15 70 (boulons avec tête hexagonale en aciers inoxydables).

Furthermore, several importers and their association reiterated their claim to further limit the investigation to two CN codes, namely 7318 15 61 (hexagon socket head screws of stainless steel) and 7318 15 70 (hexagon bolts of stainless steel).


examen visuel de la tête et de la gorge; incision et examen des ganglions lymphatiques sous-maxillaires, rétropharyngiens et parotidiens (Lnn. retropharyngiales, mandibulares et parotidei); examen des masséters externes, dans lesquels il convient de pratiquer deux incisions parallèles à la mandibule, ainsi que des masséters internes (muscles ptérygoïdes internes), à inciser suivant un plan.

visual inspection of the head and throat; incision and examination of the sub-maxillary, retropharyngeal and parotid lymph nodes (Lnn retropharyngiales, mandibulares and parotidei). examination of the external masseters, in which two incisions must be made parallel to the mandible, and the internal masseters (internal pterygoid muscles), which must be incised along one plane.


1)examen visuel de la tête et de la gorge; incision et examen des ganglions lymphatiques sous-maxillaires, rétropharyngiens et parotidiens (Lnn. retropharyngiales, mandibulares et parotidei); examen des masséters externes, dans lesquels il convient de pratiquer deux incisions parallèles à la mandibule, ainsi que des masséters internes (muscles ptérygoïdes internes), à inciser suivant un plan.

visual inspection of the head and throat; incision and examination of the sub-maxillary, retropharyngeal and parotid lymph nodes (Lnn retropharyngiales, mandibulares and parotidei); examination of the external masseters, in which two incisions must be made parallel to the mandible, and the internal masseters (internal pterygoid muscles), which must be incised along one plane.


1.2.2. si le début du contact de la tête peut être déterminé de manière satisfaisante, t1 et t2 sont les deux instants, exprimés en secondes, définissant l'intervalle de temps écoulé entre le début du contact de la tête et la fin de l'enregistrement pour lequel la valeur du HPC est maximale,

1.2.2. if the beginning of the head contact can be determined satisfactorily, t1 and t2 are the two time instants, expressed in seconds, defining an interval between the beginning of the head contact and the end of the recording for which the value of HPC is maximum;


La face externe du dispositif doit être lisse, essentiellement plane ou ondulée horizontalement et, autant que possible, continue de l'avant vers l'arrière; les parties adjacentes peuvent toutefois se chevaucher à condition que l'arête de chevauchement soit tournée vers l'arrière ou vers le bas, ou un espace libre de 25 mm de long au plus peut être aménagé à condition que la partie arrière ne soit pas en saillie sur la partie avant; les têtes arrondies des boulons ou des rivets ne doiven ...[+++]

The outer surface of the device shall be smooth, substantially flat or horizontally corrugated and so far as possible continuous from front to rear; adjacent parts may however overlap, provided that the overlapping edge faces rearwards or downwards, or a gap of not more than 25 mm measured longitudinally may be left, provided that the rearward part does not protrude outboard of the forward part; domed heads of bolts or rivets may protrude beyond the surface to a distance not exceeding 10 mm and other parts may protrude to the same extent provided that they are smooth and similarly rounded; all external edges and corners shall be round ...[+++]


2.2.5. Si deux ou plusieurs commandes sont situées assez près l'une de l'autre de manière à pouvoir être contactées simultanément par le piston ou par la fausse tête, elles doivent être traitées comme suit: 2.2.5.1. des commandes multiples pouvant être logées en même temps dans la cavité de la fausse tête sont traitées comme une seule saillie;

2.2.5. If two or more controls are situated sufficiently close for the ram or the headform to contact them simultaneously, they shall be treated as follows: 2.2.5.1.




www.wordscope.com (v4.0.br.77)

rivet à deux têtes

Date index:2023-03-20 -

Pour agences de traduction et traducteurs - For translation agencies & translators

Paris - Brussels - Montreal - Genève - Luxembourg - Madrid

Wordscope - Professional computer-assisted translation tools (CAT tools)