Both the substitution of lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC used in industrial monitoring and control instruments (IMCIs) and the substitution of these components in IMCIs are still technically impracticable.

A low-voltage supply of ≥ 40 V and ≤ 50 V in series with a suitable lamp shall be connected, if necessary, between the probe and live parts inside the barrier or enclosure.

Renewable energy management and optimisation for small and medium-scale Distributed Generators in rural environment with predominant solar generation: 20 MW on Low Voltage (LV) network + 50 MW on Medium Voltage (MV) network.

Renewable energy management and optimisation for small and medium-scale Distributed Generators in rural environment with predominant solar generation: 20 MW on Low Voltage (LV) network + 50 MW on Medium Voltage (MV) network.

As ecodesign requirements for the no-load condition of low voltage external power supplies should be more demanding than ecodesign requirements for off-mode condition of electrical and electronic household and office equipment placed on the market with a low voltage external power supply, the requirements of Regulation (EC) No 1275/2008 of 17 December 2008 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for standby and off-mode power consumption of electrical and electronic household and office equipment (2), should not apply to electrical and electronic household and ...[+++]office equipment which is placed on the market with a low voltage external power supply.

The following electricity retail markets will be considered for the purpose of the present statement: (i) the supply of electricity to Large Industrial Customers (LICs) which are connected to the high and medium voltage (HV and MV) grid and (ii) the supply of electricity to smaller industrial, commercial and domestic customers which are connected to the low voltage (LV) grid.