Construction adhesives - Pins for structural joints / Connectors - Three dimensional nailing plates - Anchors bolts / Screws - Wall plates made of stainless steel. - Cavity trays - Fastener for external wall claddings and flat or pitched roofs - Connector for sandwich elements of concrete - Gas and watertight seals for pipes in wall and floor penetrations - Sealing kits, profiles and strips - Joints sealing compounds - Elastic suspended fixings - Tension Rods - Point fastener - Surface repellents and coating treatments - Levelling fasteners for roofs, walls and interior applications - Waterproofing products / treatments

Construction adhesives - Pins for structural joints / Connectors - Three dimensional nailing plates - Anchors bolts / Screws - Wall plates made of stainless steel. - Cavity trays - Fastener for external wall claddings and flat or pitched roofs - Connector for sandwich elements of concrete - Gas and watertight seals for pipes in wall and floor penetrations - Sealing kits, profiles and strips - Joints sealing compounds - Elastic suspended fixings - Tension Rods - Point fastener - Surface repellents and coating treatments - Levelling fasteners for roofs, walls and interior applications - Waterproofing products / treatments

1.3.3. The attachment device recommended is that whereby the structure rests on supports placed approximately in the axis of the wheels or, if possible, whereby the structure is secured to the trolley by the fastenings of the suspension system.

ANNEX TO THE EEC TYPE-APPROVAL CERTIFICATE FOR A TRACTOR TYPE WITH REGARD TO THE STRENGTH OF PROTECTION STRUCTURES (REAR-MOUNTED ROLLBAR, FRAME OR CAB) AND THE STRENGTH OF THEIR ATTACHMENT TO THE TRACTOR(Articles 4 (2) and 10 of Council Directive 74/150/EEC of 4 March 1974 on the approximation of the laws of the Member States relating to the type-approval of wheeled agricultural or forestry tractors)EEC type-approval No: extension (; ) 1.Trade name or mark of tractor: 2.Tractor type and commercial description: 3.Name and address of tractor manufacturer: 4.If applicable, name and address of manufacturer's authorized representative: 5.Trad ...[+++]e name or mark and type of protection structure: 6.Extension of EEC-approval for the following type(s) of protection structure: 7.Tractor submitted for EEC type-approval on: 8.Technical service responsible for EEC type-approval conformity control: 9.Date of report issued by that service: 10.Number of report issued by that service: 11.EEC type-approval with regard to the strength of the protection structures and the strength of their attachment to the tractor has been granted/refused ($).12.The extension of EEC type-approval with regard to the strength of the protection structures and the strength of their attachment to the tractor has been granted/refused ($).13.Place: 14.Date: 15.Signature: (; ) If applicable, state whether this is the first, etc. extension of the original EEC type-approval.

()Appendix 2 MODEL REFERENCE AXLE TEST REPORT FORM AS PRESCRIBED IN APPENDIX 1, ITEM 3.6 TEST REPORT N° 1.IDENTIFICATION 1.1.Axle Manufacturer (name and address) Make Type Model Technically permissible mass (Pe) (kg) 1.2.Brake Manufacturer (name and address) Make Type Model Technically permissible camshaft input torque Cmax Brake drum:Internal diameter Mass Material (attach dimensioned drawing as in Figure 1) Brake lining:Manufacturer Type Identification (must be visible when the lining is mounted on the brake shoe) Width Thickness Su ...[+++]rface area Method of attachment Brake geometry (attach dimensioned drawing as in Figure 2) 1.3Wheel (S) Single/twin(1) Rin diameter (D) (attach dimensioned drawing as in Figure 1) 1.4Tyres Rolling radius (R) at reference mass (P2) 1.5Actuation Manufacturer Type (cylinder/diaphragm)(1) Model Lever length (l) 2.RECORD OF TEST RESULTS (Corrected to take account of rolling resistance) >TABLE>

The Directive completes the internal market for this type of vehicle by harmonizing the laws of the Member States relating to twelve components and characteristics of two or three-wheel vehicles: - tyres - lighting and light-signalling devices - external projections - rear-view mirrors - measures to counter atmospheric pollution - fuel tanks - measures to counter tampering - electromagnetic compatibility - permissible sound level and exhaust system - trailer couplings and side-car attachments - safety belts and safety belt anchorages - glazing, windscreen wipers and washers and de-icing and de-misting devices.