Definition: Voluntary, repetitive, stereotyped, nonfunctional (and often rhythmic) movements that do not form part of any recognized psychiatric or neurological condition. When such movements occur as symptoms of some other disorder, only the overall disorder should be recorded. The movements that are of a non self-injurious variety include: body-rocking, head-rocking, hair-plucking, hair-twisting, finger-flicking mannerisms, and hand-flapping. Stereotyped self-injurious behaviour includes repetitive head-banging, face-slapping, eye-poking, and biting of hands, lips or other body parts. All the stereotyped movement disorders occur most f ...[+++]requently in association with mental retardation (when this is the case, both should be recorded). If eye-poking occurs in a child with visual impairment, both should be coded: eye-poking under this category and the visual condition under the appropriate somatic disorder code. | Stereotype/habit disorder

head disk assembly | HDA | head/disk assembly

When Member States conduct their bilateral relations with China – whether one-on-one or as groups of countries such as the 16+1 format – they should cooperate with the Commission, the EEAS and other Member States to help ensure that aspects relevant to the EU are in line with EU law, rules and policies, and that the overall outcome is beneficial for the EU as a whole.

Innovation is important for all regions; for advanced ones to remain ahead and lagging ones to catch up.[3]

Mr. Steve Mahoney: It's in that copy and it's done on the flip side?

(c) in the case of a restraint system other than a car bed, retain the torso of the anthropomorphic test device within the restraint system, and not allow any portion of the target points on either side of the device’s head, located on the transverse axis passing through the centre of mass of the device’s head and perpendicular to the head’s midsagittal plane, to pass at any time, during or immediately after the test, through the transverse orthogonal planes formed by the extension of the seat back frontal surface plane of the restraint system and by the plane that passes through the uppermost point of the restraint system, as shown in Figure 7 of Schedule 7, or through the vertical transverse plane passing through point X on the stan ...[+++]dard seat assembly, as shown in Figure 8 of Schedule 7;