If a full flow dilution system is used, q medf as determined according to section 6.2 shall be replaced with q mdew as determined according to section 6.3.

To do that, it is necessary to go back in time as much as possible to determine what the practitioners, then Revenue Canada and the Department of Finance think about these issues in those years.

(15) It is necessary to lay down the manner in which interested parties should be given notice of the information which the authorities require; interested parties should have ample opportunity to present all relevant evidence and to defend their interests; it is also necessary to set out the rules and procedures to be followed during the investigation, in particular the rules whereby interested parties are to make themselves known, present their views and submit information within specified time limits, if such views and information are to be taken into account; whilst respecting commercial confidentiality, it is necessary to allow i ...[+++]nterested parties access to all information pertaining to the investigation which is relevant to the presentation of their case; it is necessary to provide that, where parties do not cooperate satisfactorily, other information may be used to establish findings and that such information may be less favourable to the parties than if they had cooperated.

Although adequate peaks according to (a) may be preferred from a theoretical point of view, those according to (b) are easier to determine in practice.

5.1. Once the dummy has been placed in position in accordance with section 4, the H point and the true backrest rake angle under consideration are determined by the H point and the rake angle of the reference line of the trunk of the dummy.

2.2. All points of contact situated below the lower edge of the windscreen and forward of the H point shall be determined for each dimension from the pivotal point to the top of the head capable of being measured by the test apparatus within the interior dimensions of the vehicle.