2.2.1. Determination of the Diluted Exhaust Gas Flow PDP-CVS system The calculation of the mass flow over the cycle, if the temperature of the diluted exhaust is kept within ± 6 K over the cycle by using a heat exchanger, is as follows: M TOTW = 1,293 x V0 x NP x (pB - p1 ) x273 / (101,3 x T) where M TOTW = mass of the diluted exhaust gas on wet basis over the cycle V0 = volume of gas pumped per revolution under test conditions (m³/rev) NP = total revolutions of pump per test pB = atmospheric pressure in the test cell (kPa) p1 = pressure drop below atmospheric at the pump inlet (kPa) T = average temperature of the diluted exhaust gas at ...[+++]pump inlet over the cycle (K) If a system with flow compensation is used (i.e. without heat exchanger), the instantaneous mass emissions shall be calculated and integrated over the cycle.

Included are deforestation, salinization of soil, the damage to our wetlands, desertification, pollution in the Arctic (1710) Colleagues in the House here today, my friends from the Bloc Quebecois, friends from the Liberal Party, went to the Arctic and heard increasingly disturbing evidence of carcinogens, teratogens and toxins increasing in the Arctic.

I want to use this occasion to call the attention of the House to the fact that Canada has recently received formal notification that the Creston valley wildlife management area has been registered as Canada's 32nd wetland of international importance under the Ramsar convention.