cabin monitor

5. The cables connecting the recording equipment to the transmitter must be protected by a continuous plastic-coated rust-protected steel sheath with crimped ends, except where an equivalent protection against manipulation is guaranteed by other means (for example by electronic monitoring such as signal encryption) capable of detecting the presence of any device which is unnecessary for the correct operation of the recording equipment and the purpose of which is to prevent the accurate operation of the recording equipment by short circuiting or interruption or by modification of the electronic data from the speed and distance sensor. A joint, comprised of se ...[+++]aled connections, is deemed to be continuous within the meaning of this Regulation.

provided that the recording equipment continues to function reliably and correctly and is resealed by an approved fitter or workshop immediately after fitting the speed limitation device or any other device contributing to road safety or within seven days in other cases.

2. The main types of serious deficiency in the effective functioning of the management and control system shall be cases where any of the key requirements referred to in points 2, 4, 5, 13, 15, 16 and 18 of Table 1 of Annex IV, or two or more of the other key requirements in Table 1 of Annex IV are assessed as falling into categories 3 or 4 set out in Table 2 of Annex IV.

2. The main types of serious deficiency in the effective functioning of the management and control system shall be cases where any of the key requirements referred to in points 2, 4, 5, 13, 15, 16 and 18 of Table 1 of Annex IV, or two or more of the other key requirements in Table 1 of Annex IV are assessed as falling into categories 3 or 4 set out in Table 2 of Annex IV.