Boost Your Productivity !Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Serrure Vale
Serrure Yale
Serrure américaine
Serrure à barillet
Serrure à combinaison
Serrure à combinaison à canon
Serrure à combinaisons
Serrure à combinaisons et à barillet
Serrure à goupilles
Serrure à secret
Tableau de clés muni d'une serrure à combinaison
Tableau porte-clés muni d'une serrure à combinaison

Translation of "Serrure à combinaisons et à barillet " (French → English) :

TERMINOLOGY
see also In-Context Translations below
serrure à combinaisons et à barillet

key by-pass | key override
serrurerie > serrure
serrurerie > serrure


serrure à combinaison [ serrure à combinaisons | serrure à secret ]

combination lock [ puzzle lock | dial lock ]
Serrurerie
Locks and Locksmithing


tableau de clés muni d'une serrure à combinaison [ tableau porte-clés muni d'une serrure à combinaison ]

dial-lock keypress
Menus objets | Serrurerie
Smallwares | Locks and Locksmithing


serrure à combinaison

combination lock
serrurerie > serrure
serrurerie > serrure


serrure à combinaison à canon

combination cylinder lock
Serrurerie
Locks and Locksmithing


serrure américaine | serrure Yale | serrure à barillet | serrure à goupilles

pin tumbler lock | Yale lock | cylinder lock
serrurerie > serrure
serrurerie > serrure


serrure à combinaison

combination lock
IATE - Construction and town planning
IATE - Construction and town planning


serrure à barillet | serrure Vale

tubular lock
IATE - Industrial structures and policy | Building and public works
IATE - Industrial structures and policy | Building and public works
IN-CONTEXT TRANSLATIONS
Les clés de contact qui ne doivent pas être insérées dans la serrure du démarreur pendant le fonctionnement du véhicule, qui sont au ras de la surface environnante ou encastrées dedans, dont la tête peut être rabattue par rapport à la tige ou au barillet, qui sont situées sous le niveau de la place assise du pilote ou qui ne sont pas situées devant le pilote sont dispensées des prescriptions énoncées au point 1.3.7.

Ignition keys which are not required to be inserted in the ignition lock during vehicle operation, which are flush with or encased by the surrounding surface, of which the head can fold in relation to its shaft or barrel, which is located below the level of the rider’s seating position or which is not located forward of the rider are exempted from the requirements of point 1.3.7.


S'il est muni d'une serrure à combinaison, celle-ci n'est connue que des agents de l'État ou de l'organisation autorisés à accéder aux informations classifiées de l'UE conservées dans le meuble; elle est changée tous les six mois, ou plus tôt en cas de transfert d'un agent, d'annulation de l'habilitation de sécurité d'un des agents qui connaît la combinaison ou de risque de compromission.

Where combination locks are used, the combination shall be known only to those officials in the State or organisation having authorised access to the EU classified information stored in the container and shall be changed every six months, or sooner on the transfer of an official, on withdrawal of the security clearance of one of the officials knowing the combination or if there is a risk of compromise.


S'il est muni d'une serrure à combinaison, celle-ci n'est connue que des agents de l'État ou de l'organisation autorisés à accéder aux informations classifiées de l'UE conservées dans le meuble; elle est changée tous les six mois, ou plus tôt en cas de transfert d'un agent, d'annulation de l'habilitation de sécurité d'un des agents qui connaît la combinaison ou de risque de compromission.

Where combination locks are used, the combination shall be known only to those officials in the State or organisation having authorised access to the EU classified information stored in the container and shall be changed every six months, or sooner on the transfer of an official, on withdrawal of the security clearance of one of the officials knowing the combination or if there is a risk of compromise.


3.8. La serrure doit être conçue, fabriquée et fixée de telle sorte qu'il soit impossible de faire tourner le barillet, quand il est en position verrouillée, en exerçant un couple de moins de 0,245 m daN avec autre chose que la clé correspondante

3.8. The lock must be designed, manufactured and installed in such a way that it is not possible to turn the cylinder when it is in the locked position by applying a torque of less than 0,245 m daN with anything other than the appropriate key, and


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
5.7. Les serrures utilisées doivent comporter au moins 1 000 combinaisons différentes, c'est-à-dire qu'une clé correspondant à une combinaison déterminée ne doit pouvoir en moyenne ouvrir plus d'une serrure sur 1 000.

5.7. The locks used shall comprise not less than 1 000 different combinations, that is, the key appropriate to one combination shall not be capable of opening more than an average of one lock in 1 000.




www.wordscope.com (v4.0.br.77)

Serrure à combinaisons et à barillet

Date index:2021-02-12 -

Pour agences de traduction et traducteurs - For translation agencies & translators

Paris - Brussels - Montreal - Genève - Luxembourg - Madrid

Wordscope - Professional computer-assisted translation tools (CAT tools)