Au cas ou serait requise la détermination des extinctions spécifiques après passage sur alumine, on procède de la façon suivante: introduire dans la colonne chromatographique 30 grammes d'alumine basique en suspension dans l'hexane; éliminer l'excès d'hexane après tassement de l'absorbant, ou au moins jusqu'à 1 centimètre environ au dessus du niveau supérieure de l'alumine.
When a determination of specific extinction is required after passage over alumina, proceed as follows. Place 30 g of basic alumina in suspension in hexane in the chromatography column. After the adsorbent has settled remove the excess hexane down to approximately 1 cm above the top of the alumina.