(d) be abrasion resistant to the extent that at least 5 000 revolutions of a Taber abraser, using No. H22 wheel and 10 N loading, are required to completely wear through a sample.

(a) machine tools that can be used as measuring machines are included if they meet or exceed the criteria specified for the machine tool function or the measuring machine function;

His Excellency the Governor General in Council, on the recommendation of the Minister of Transport, pursuant to section 338Footnote of the Canada Shipping Act, is pleased hereby to revoke the Liquified Petroleum Gas Regulations, C.R.C., c. 1437, the Steamship Machinery Construction Order, C.R.C., c. 1490, the Steamship Machinery Construction Regulations, C.R.C., c. 1491 and the Steamship Machinery Inspection Regulations, C.R.C., c. 1492, and to make the annexed Regulations respecting the construction, installation and inspection of marine machinery, in substitution therefor.

(3) Engine rooms and other machinery spaces must be provided, wherever practicable, with soundproof centralized control rooms for engine-room personnel.

EUROPA - EU law and publications - EUR-Lex - EUR-Lex - 32006L0042 - EN - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance) // DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL // of 17 May 2006 // on machinery, and amending Directive 95/16/EC (recast) // Essential health and safety requirements relating to the the design and construction of machinery // Declarations // CE marking // Categories of machinery to which one of the procedures referred ...[+++]to in Article 12(3) and (4) must be applied // Indicative list of the safety components referred to in Article 2(c) // Assembly instructions for partly completed machinery // Assessment of conformity with internal checks on the manufacture of machinery // EC type-examination // Full quality assurance // Minimum criteria to be taken into account by Member States for the notification of bodies

Before placing a machine on the Market, the manufacturer, or his authorized representative established in the Community, in order to certify the conformity of machinery, shall draw up documentation comprising: A technical construction file composed of: - an overall drawing of the machinery together with the drawings of the control circuits; - full detailed drawings, accompagnied by any calculation notes, test results, etc. required to construct the machinery; - a description of the methods adopted to eliminate hazards presented by the machinery; - as well as technical reports or certificates obtained from a competent body, and - a cop ...[+++]y of the instruction handbook for the machinery.