33xddd If a vessel or a handling facility engages in a transfer operation, the vessel’s master and the operator of the facility must, before and during the transfer operation, have the means for two-way voice communication on a continuing basis that enables the supervisor on board the vessel and the supervisor at the facility or on board the other vessel

33. If a vessel or a handling facility engages in a transfer operation, the vessel’s master and the operator of the facility must, before and during the transfer operation, have the means for two-way voice communication on a continuing basis that enables the supervisor on board the vessel and the supervisor at the facility or on board the other vessel

73. If a vessel or a handling facility engages in a transfer operation, the vessel’s master and the operator of the facility must, before and during the transfer operation, have the means for two-way voice communication on a continuing basis that enables the supervisor on board the vessel and the supervisor at the facility or on board the other vessel

(2) The Minister of Transport or the Minister of Fisheries and Oceans may, with respect to that Minister’s responsibilities under this Act, exempt for a specified period any authorized representative, master, vessel, class of vessels, operator of an oil handling facility, oil handling facility or class of oil handling facility from the application of any provision of this Act or the regulations, subject to any conditions that that Minister considers appropriate, if that Minister is of the opinion that the exemption is in the interest of preventing damage to property or the environment or is in the interest of public health or safety.

All processes directly or indirectly linked to the process units blast furnace, hot metal treatment units, blast furnace blowers, blast furnace hot stoves, basic oxygen furnace, secondary metallurgy units, vacuum ladles, casting units (including cutting), slag treatment unit, burden preparation, BF gas treatment unit, dedusting units, scrap pre-heating, coal drying for PCI, vessels preheating stands, casting ingots preheating stands, compressed air production, dust treatment unit (briquetting), sludge treatment unit (briquettin ...[+++]g), steam injection in BF unit, steam generation plant, converter BOF gas cooling and miscellaneous are included

It must also agree not to build a second continuous casting facility for slabs for at least five years from the date of closure of the slab mill; (d) ProfilArbed SA agrees by the end of 1995 at the latest, pursuant to the abovementioned Decision, to replace its L-D steel melting shop at Esch-Belval with an electric melting shop with an MPP not exceeding 1 500 kt/year; (e) until output at rolling mill IX at Esch-Belvan begins, Klöckner Stahl agrees to limit production of hot-rolled coil at the Bremen hot strip mill to 2 640 kt/year and not to exceed 3 360 kt/year, including rolling to order; (f) Klöckner Stahl undertakes not to invest, ...[+++] save by prior agreement with the Commission, in maintenance or other plant, in order to maintain the bottleneck identified in the SNV expert report ("Einschleusungslogistik für die Warmbreitbankstrasse der Hütte Bremen, 8.3.1984, Studiengesellschaft Nahverkehr mbH) which limits the quantity of slabs coming from outside for processing to 1 020 kt/year; (g) Klöckner Stahl GmbH cuts its MPP of cold-rolled strip and sheet products by 500 kt/year by reducing MPP at its Bremen plant from 1500 to 1000 kt/year as follows: 300 kt/year before the end of June 1996 200 kt/year before the end of June 1998.