cold drafted filament [ cold drawn filament ]

cold drawn operator

hot drafted filament [ hot drawn filament ]

cold-drawn steel

hardness of annealed cold drawn wire for needle bearings

cold drawn condition

Definition: Symptoms are presented by the patient as if they were due to a physical disorder of a system or organ that is largely or completely under autonomic innervation and control, i.e. the cardiovascular, gastrointestinal, respiratory and urogenital systems. The symptoms are usually of two types, neither of which indicates a physical disorder of the organ or system concerned. First, there are complaints based upon objective signs of autonomic arousal, such as palpitations, sweating, flushing, tremor, and expression of fear and distress about the possibility of a physical disorder. Second, there are subjective complaints of a nonspecific or changing nature such as fleeting aches and pains, sensations of burning, heaviness, tightness, an ...[+++]d feelings of being bloated or distended, which are referred by the patient to a specific organ or system. | Cardiac neurosis Da Costa's syndrome Gastric neurosis Neurocirculatory asthenia Psychogenic forms of:aerophagy | cough | diarrhoea | dyspepsia | dysuria | flatulence | hiccough | hyperventilation | increased frequency of micturition | irritable bowel syndrome | pylorospasm

A change to tariff item No. 5407. 61.11 or 5407.61.19 from yarn, wholly of polyesters other than partially oriented, measuring not less than 75 decitex but not more than 80 decitex, and having 24 filaments per yarn, of subheading 5402.44 or 5402.47, tariff item No. 5402. 52.10 or any other chapter, except from headings 51.06 through 51.10, 52.05 through 52.06 or 55.09 through 55.10.

For the product types exported by the sampled Chinese (groups of) exporting producers for which no sales were made by the sampled Union producers, the Commission provisionally used prices actually paid or payable in the Union for the like product, duly adjusted if necessary to include a reasonable profit, of the closest resembling product types having the same diameter, steel grade and product type (e.g. cold or hot drawn).

The pendulum tube shall have a mass of 3 ± 0,03 kg, an outside diameter of 150 mm + 1 mm/- 4 mm and a wall thickness of 3 ± 0,15 mm. Total pendulum tube length shall be 275 ± 25 mm. The pendulum tube shall be made from cold finished seamless steel (metal surface plating is permissible for protection from corrosion), with an outer surface finish of better than 2,0 micrometers.

3.3.7. The pendulum tube shall have a mass of 3 ± 0,03 kg, an outside diameter of and a wall thickness of 3 ± 0,15 mm. Total pendulum tube length shall be 275 ± 25 mm. The pendulum tube shall be made from cold finished seamless steel (metal surface plating is permissible for protection from corrosion), with an outer surface finish of better than 2,0 micrometers.