cruise-control device

controlled arc welding | controlled rate arc welding

solid-state speed control

5. The cables connecting the recording equipment to the transmitter must be protected by a continuous plastic-coated rust-protected steel sheath with crimped ends, except where an equivalent protection against manipulation is guaranteed by other means (for example by electronic monitoring such as signal encryption) capable of detecting the presence of any device which is unnecessary for the correct operation of the recording equipment and the purpose of which is to prevent the accurate operation of the recording equipment by short circuiting or interruption or by modification of the electronic data from the speed and distance sensor. A j ...[+++]oint, comprised of sealed connections, is deemed to be continuous within the meaning of this Regulation.

7.2.2.1.1. When testing a manual adjusting device, the strap shall be drawn steadily through the adjusting device, having regard for the normal conditions of use, at a rate of 100 ± 20 mm/min and the maximum force measured to the nearest integer value of N after the first 25 ± 5 mm of strap movement.

Underlines the potential of smart grids, demand side management tools and energy storage solutions, both to facilitate the best possible integration of RES-E and to even out grid fluctuations; re-emphasises the urgent need for further research into, and deployment of, electricity storage including on the basis of cooperation with pumped-storage hydroelectric plants; notes in particular the need for further research into variable-speed storage options, which offer a more flexible system for controlling storage speeds and thus facilitate faster and better-matching connections; calls on the Member States to avoid imposing a double tax burden ...[+++] on electricity storage operators;

Lorries are gradually being fitted with cruise control equipment.