double-corner block [ pier block ]

corner rounder [ corner rounding machine | cornerer | round-cornering machine ]

split air conditioning system | split system

Being two lines drawn parallel to and on opposite sides of and perpendicularly distant 7,500 feet from the centre line of Runway 08-26 and productions thereof, which centre line when produced westerly passes through an iron pipe in concrete on the west boundary of Block 1 of Lot A, Group 2, Kamloops Division, Yale District, Plan 3049, distant southerly 1,095.25 feet, more or less, from the most westerly northwest corner of the said Block 1, and which centre line when produced easterly passes through an iron pipe in concrete on the west boundary of Lot 5, Block 7, Kamloops Division, Yale District, Plan 2456, distant southerly 344.60 feet ...[+++]more or less, from the northwest corner of the said Lot 5 and two lines drawn at right angles to the said centre line from points distant 17,500 feet measured easterly and westerly along the said centre line and productions from the strip ends, which outer limits are shown on Department of Transport Plan No. V. 226, dated January 15, 1969.

(5) If wood, preferably two inches thick but not less than 1 1/2 inches in thickness, is used, the footboard shall not be cut or notched at any point, outer corners may be radiused or slightly beveled.

Therefore, a sign consisting of the three-dimensional shape of a square or rectangular tablet for washing machines or dishwashers, with chamfered edges, bevelled or slightly rounded corners, speckles and an inlay on the upper surface may, in principle, constitute a trade mark, provided that the two conditions mentioned in the preceding paragraph are met.

On 7 October 1998 Procter Gamble applied to OHIM for registration as Community trade marks of the three-dimensional shapes of two tablets, one square and the other rectangular, with chamfered edges, bevelled or slightly rounded corners, speckles and inlays on the upper surface.