Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable

Methods of Sampling and Testing Waxes and Polishes - Standard Test Method for pH of Aqueous Solutions with the Glass Electrode

Québec Standard Test | Q.S. Test

Technical regulations,standards,testing and certification

standard test bar

assist in the development of standard operating processes in the food chain | complete the development of standard operating procedures in the food chain | assist in the development of standard operating procedures in the food chain | implement test the development of standard operating procedures in the food chain

The measurement of errors on installation and during use shall be carried out under the following conditions, which are to be regarded as constituting standard test conditions:

EUROPA - EU law and publications - EUR-Lex - EUR-Lex - 32008R0692 - EN - Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance) - COMMISSION REGULATION - (EC) No 692/2008 // of 18 July 2008 // implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with ...[+++]respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information // ADMINISTRATIVE PROVISIONS FOR EC TYPE-APPROVAL // Appendix 1 // Verification of conformity of production — First statistical method // Appendix 2 // Verification of conformity of production — Second statistical method // Appendix 3 // MODEL // INFORMATION DOCUMENT No . // Appendix to information document // INFORMATION ON TEST CONDITIONS // Appendix 4 // MODEL OF EC TYPE-APPROVAL CERTIFICATE // (Maximum format: A4 (210 × 297 mm)) // Addendum to EC type-approval certificate No . // concerning the type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information according to Regulation (EC) No 715/2007 // Appendix 5 // Vehicle OBD information // Appendix 6 // EC Type –Approval Certification Numbering System // Appendix 7 // IN-SERVICE CONFORMITY // IN-SERVICE CONFORMITY CHECK // STATISTICAL PROCEDURE FOR IN-SERVICE CONFORMITY TESTING // RESPONSIBILITIES FOR IN-SERVICE CONFORMITY // VERIFYING AVERAGE EXHAUST EMISSIONS AT AMBIENT CONDITIONS // (TYPE 1 TEST) // EMISSIONS DATA REQUIRED AT TYPE-APPROVAL FOR ROADWORTHINESS PURPOSES // MEASURING CARBON MONOXIDE EMISSION AT IDLING SPEEDS // (TYPE 2 TEST) // MEASUREMENT OF SMOKE OPACITY // VERIFYING EMISSI ...

resist mechanical compressive strength of at least 300 N under standard test conditions’.

Where, by virtue of their nature and the foreseeable conditions of their use, certain substances and mixtures which are hazardous to health or harmful biological agents possess high penetrative power which limits the duration of the protection provided by the PPE in question, the latter must be subjected to standard tests with a view to their classification on the basis of their performance.