Boost Your Productivity !Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Button-head screw
Cup head nib bolt
Cup nib bolt
J bolt
J-bolt
Offset round bend J-bolt
Round bend U bolt
Round bend U-bolt
Round bend hook bolt
Round bend u-bolt
Round head bolt
Round head nib bolt
Round head screw
Round screw
Rounded bend
Rounded elbow
Square bend U-bolt

Translation of "Round bend U bolt " (English → French) :

TERMINOLOGY
see also In-Context Translations below
round bend U bolt

étrier fileté arrondi
génie mécanique > vis et écrou
génie mécanique > vis et écrou


round bend U-bolt

boulon en U rond | étrier fileté rond
génie mécanique > vis et écrou
génie mécanique > vis et écrou


round bend u-bolt

étrier fileté à cintrage rond
Joining Elements (Mechanical Components)
Éléments d'assemblage (Composants mécaniques)


J-bolt | J bolt | offset round bend J-bolt

boulon en J
génie mécanique > vis et écrou
génie mécanique > vis et écrou


square bend U-bolt

étrier fileté à centrage à angle droit
Joining Elements (Mechanical Components)
Éléments d'assemblage (Composants mécaniques)


round bend hook bolt

boulon d'ancrage cintré courbe
Joining Elements (Mechanical Components)
Éléments d'assemblage (Composants mécaniques)


cup head nib bolt | cup nib bolt | round head nib bolt

corps de boulon à tête ronde à ergot
IATE - Technology and technical regulations | Mechanical engineering
IATE - Technology and technical regulations | Mechanical engineering


rounded bend | rounded elbow

coude arrondi
IATE - Mechanical engineering
IATE - Mechanical engineering


button-head screw | round head bolt | round head screw | round screw

boulon à tête ronde | vis à tête bombée | vis à tête demi-ronde | vis à tête ronde
IATE - Mechanical engineering
IATE - Mechanical engineering
IN-CONTEXT TRANSLATIONS
‘stem’ means any projection or part which appears to have a round or virtually round shape, including bolt and screw heads, with a relatively constant overall diameter and which has a free end that can be contacted;

21) «tige»: toute saillie ou pièce de forme ronde ou pratiquement ronde, y compris les têtes de vis et de boulons, d’un diamètre hors tout relativement constant et dont l’extrémité libre peut être touchée;


The outer surface of the device shall be smooth, substantially flat or horizontally corrugated and so far as possible continuous from front to rear; adjacent parts may however overlap, provided that the overlapping edge faces rearwards or downwards, or a gap of not more than 25 mm measured longitudinally may be left, provided that the rearward part does not protrude outboard of the forward part; domed heads of bolts or rivets may protrude beyond the surface to a distance not exceeding 10 mm and other parts may protrude to the same extent provided that they are smooth and ...[+++]

La face externe du dispositif doit être lisse, essentiellement plane ou ondulée horizontalement et, autant que possible, continue de l’avant vers l’arrière; les parties adjacentes peuvent toutefois se chevaucher, à condition que l’arête de chevauchement soit tournée vers l’arrière ou vers le bas, ou un espace libre de 25 mm de long au plus peut subsister, à condition que la partie arrière ne soit pas en saillie, vers l’extérieur, par rapport à la partie avant; les têtes arrondies des boulons ou des rivets ne doivent pas être en saillie, de plus de 10 mm par rapport à la surface, et d’autres éléments peuvent être en saillie dans la même ...[+++]


The lateral extremities of the cross-member shall not bend to the rear or have a sharp outer edge; this condition is fulfilled when the lateral extremities of the cross-member are rounded on the outside and have a radius of curvature of not less than 2,5 mm;

Les extrémités latérales de la traverse ne doivent pas être recourbées vers l’arrière, ni présenter de bord extérieur coupant; cette condition est remplie lorsque les extrémités latérales de la traverse présentent, vers l’extérieur, un arrondi ayant un rayon de courbure d’au moins 2,5 mm;


Timber or lumber or wood, namely: lumber and timber planks and boards of amaranth, cocoboral, boxwood, cherry, chestnut, walnut, gumwood, mahogany, pitch pine, rosewood, sandalwood, sycamore, spanish cedar, oak, hickory, whitewood, African teak, black-heart ebony, lignum vitae, red cedar, redwood, satinwood and white ash, when not otherwise manufactured than roughsawn or split or creosoted, vulcanized or treated by any other preserving process; sawed or split boards, planks, deals and other lumber when not further manufactured than dressed on one side only or creosoted, vulcanized or treated by any preserving process; pine and spruce clapboards; timber or lumber hewn or sawed, squared or sided or creosoted; laths, pickets and palings; ...[+++]

Bois de service ou de charpente scié en madriers et planches, d’amaranthe, cocoboral, buis, cerisier, châtaignier, noyer, gommier, acajou, pitchpin, bois de rose, santal, sycomore, cèdre acajou, chêne, noyer, bois blanc, teck, ébène noire, gaïac, cèdre rouge, redwood, bois satiné et frêne blanc, lorsqu’ils ne sont pas autrement ouvrés que sciés ou fendus, ou imprégnés de créosote, vulcanisés ou traités par quelque autre procédé de conservation que ce soit; planches, madri ...[+++]


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
I know it's the opposition's turn and the bells are going to ring, but I would ask the opposition's indulgence in allowing Mr. Grose, a member who has made the trips to all five regions and hasn't missed any meetings, if we could bend the rule and allow him a round.

Je sais que c'est le tour de l'opposition et que le timbre est sur le point de retentir, mais j'aimerais demander à l'opposition de me permettre de faire une entorse à la règle pour permettre à M. Grose, un membre qui a participé au voyage dans toutes les cinq régions et qui n'a pas manqué une seule réunion, de poser ses questions.


Correct position on the road: proper position on the road, in lanes, on roundabouts, round bends, suitable for the type and the characteristics of the vehicle; pre-positioning.

position correcte sur la route, dans les voies de circulation, les carrefours giratoires, les virages, en fonction du type et des caractéristiques du véhicule; prépositionnement.


Correct position on the road: proper position on the road, in lanes, on roundabouts, round bends, suitable for the type and the characteristics of the vehicle; pre-positioning;

position correcte sur la route, dans les voies de circulation, les carrefours giratoires, les virages, en fonction du type et des caractéristiques du véhicule; prépositionnement;


Now that we are coming round the final bend, we need to make one final sprint to ensure victory”.

Maintenant que nous entrons dans la dernière ligne droite, nous devons nous lancer dans un sprint final pour garantir la victoire».


The outer surface of the device shall be smooth, substantially flat or horizontally corrugated and so far as possible continuous from front to rear; adjacent parts may however overlap, provided that the overlapping edge faces rearwards or downwards, or a gap of not more than 25 mm measured longitudinally may be left, provided that the rearward part does not protrude outboard of the forward part; domed heads of bolts or rivets may protrude beyond the surface to a distance not exceeding 10 mm and other parts may protrude to the same extent provided that they are smooth and ...[+++]

La face externe du dispositif doit être lisse, essentiellement plane ou ondulée horizontalement et, autant que possible, continue de l'avant vers l'arrière; les parties adjacentes peuvent toutefois se chevaucher à condition que l'arête de chevauchement soit tournée vers l'arrière ou vers le bas, ou un espace libre de 25 mm de long au plus peut être aménagé à condition que la partie arrière ne soit pas en saillie sur la partie avant; les têtes arrondies des boulons ou des rivets ne doivent pas être en saillie de plus de 10 mm par rapport à la surface, et d'autres éléments peuvent être en saillie dans la même limite à condition d'être li ...[+++]


The modalities that we are discussing now are really the nuts and bolts of this Doha round.

Les modalités dont nous discutons maintenant sont vraiment les rouages de cette ronde de Doha.




www.wordscope.com (v4.0.br.77)

'Round bend U bolt'

Date index:2023-10-09 -

Pour agences de traduction et traducteurs - For translation agencies & translators

Paris - Brussels - Montreal - Genève - Luxembourg - Madrid

Wordscope - Professional computer-assisted translation tools (CAT tools)