Boost Your Productivity !Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Aerodynamic efficiency
Aerofoil blade section
Blade
Blade attach pin
Blade attaching pin
Blade pin
Blade profile
Blade retaining bolt
Blade root fitting pin
Blade section
Blade sections
Depth of blade section
Evaluating wind turbine blades
Grader blade section
Knife section
Lift drag ratio of blade section
Mower section
Propeller sections
Retaining pin
Sickle blade
Test wind turbine blades
Wind turbine blades evaluating
Wind turbine blades testing

Translation of "Blade section " (English → French) :

TERMINOLOGY
see also In-Context Translations below
depth of blade section

profondeur du profil
IATE - SCIENCE | Electronics and electrical engineering
IATE - SCIENCE | Electronics and electrical engineering


blade section

profil d'une pale
IATE - SCIENCE | Electronics and electrical engineering
IATE - SCIENCE | Electronics and electrical engineering


aerofoil blade section

profil d'aile portante [ section biconvexe ]
Propulsion of Water-Craft
Propulsion des bateaux


grader blade section

profilé pour lames de niveleuses
métallurgie > sidérurgie
métallurgie > sidérurgie


blade profile [ blade section ]

profil de pale
Electric Rotary Machines - Types | Wind Energy
Machines tournantes électriques - types | Énergie éolienne


propeller sections [ blade sections ]

sections de pale
Ship and Boat Parts | Propulsion of Water-Craft
Parties des bateaux | Propulsion des bateaux


aerodynamic efficiency | lift drag ratio of blade section

coefficient de glissement du profil | finesse du profil
IATE - Soft energy
IATE - Soft energy


mower section | knife section | sickle blade | blade

section
agriculture > matériel de récolte
agriculture > matériel de récolte


wind turbine blades evaluating | wind turbine blades testing | evaluating wind turbine blades | test wind turbine blades

tester des pales d'éoliennes
skill
Aptitude


blade attach pin | blade attaching pin | blade root fitting pin | retaining pin | blade pin | blade retaining bolt

broche de pale | broche
aéronautique > hélicoptère
aéronautique > hélicoptère
IN-CONTEXT TRANSLATIONS
(2) The width and thickness of propeller blade sections shall not be less than that determined by the following formulae:

(2) La largeur et l’épaisseur des ailes d’hélices ne doivent pas être inférieures à celles qui sont déterminées au moyen des formules suivantes :


Hot section components (i.e., combustion chambers and liners; high pressure turbine blades, vanes, disks and related cooled structure; cooled low pressure turbine blades, vanes, disks and related cooled structure; cooled augmenters; and cooled nozzles);

Composants de partie chaude (c’est-à-dire chambres de combustion et chemises de chambre de combustion; aubes, ailettes et disques de turbine haute pression ainsi que structure refroidie connexe; aubes, ailettes et disques de turbine basse pression refroidie ainsi que structure refroidie connexe; dispositifs d’augmentation (de poussée) refroidis; tuyères refroidies);


201.07 (1) The manufacturer of a fixed pitch propeller, a propeller blade or a propeller hub shall place thereon, in accordance with subsections (2) and 201.05(2), the identification information required by section 201.08.

201.07 (1) Le constructeur d’une hélice à pas fixe, d’une pale d’hélice ou d’un moyeu d’hélice doit, conformément aux paragraphes (2) et 201.05(2), graver ou estamper les renseignements visés à l’article 201.08.


(d) “W” = expanded width of a cylindrical section of the propeller blade at the appropriate radius in centimetres;

d) « L » est en centimètres la largeur déployée d’une coupe circulaire d’une aile d’hélice au rayon approprié;


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
4.4.1. The abovementioned devices shall be mounted in such a way that the wiper-blade spindle is covered with a protector having a radius of curvature of at least 2,5 mm and a minimum area of 150 mm² measured in the form of a projection over a section which is at the most 6,5 mm from the most projecting point.

4.4.1. Les dispositifs susmentionnés doivent être fixés de telle sorte que l'arbre porte-balai soit recouvert d'un élément protecteur ayant un rayon de courbure d'au moins 2,5 mm et une surface minimale de 150 mm² mesurée en projection sur une section éloignée de 6,5 mm au plus du point le plus saillant.




www.wordscope.com (v4.0.br.77)

'Blade section'

Date index:2024-01-09 -

Pour agences de traduction et traducteurs - For translation agencies & translators

Paris - Brussels - Montreal - Genève - Luxembourg - Madrid

Wordscope - Professional computer-assisted translation tools (CAT tools)