THENCE continuing southerly along the boundary between the said Townships, being also the eastern boundary of Lot 15, Concession 10, to a point in the said eastern boundary distant 730.0 metres measured northerly from the southeasterly corner of Lot 15, Concession 10;

The radii on corners and plate edges shall be determined at the point(s) of contact with the testing device and shall be continued or progressively less in the directions where contact between the testing device and corner or edge no longer occurs.

The radii on corners and plate edges shall be determined at the point(s) of contact with the testing device and there shall be a smooth transition to a smaller radius, if any, in the direction where contact between the testing device and corner or edge no longer occurs.

The differences in interpretations of the Directive by the Member States give patients in different parts of Europe different access to high quality information on pharmaceuticals.

The photograph of the holder is glued in and bears the stamp of the Dirección General de Protocolo (Directorate-General for Protocol) in one corner.

The outer surface of the device shall be smooth, substantially flat or horizontally corrugated and so far as possible continuous from front to rear; adjacent parts may however overlap, provided that the overlapping edge faces rearwards or downwards, or a gap of not more than 25 mm measured longitudinally may be left, provided that the rearward part does not protrude outboard of the forward part; domed heads of bolts or rivets may protrude beyond the surface to a distance not exceeding 10 mm and other parts may protrude to the same extent provided that they are smooth and similarly rounded; all external edges and corners shall be rounded with a radius not less than 2,5 mm (tested as prescribed in Directive ...[+++] 74/483/EEC ($)).