Boost Your Productivity !Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Calcul des ossatures à moment fléchissant maximal
Construction à ossature à moment fléchissant maximal

Translation of "Calcul des ossatures à moment fléchissant maximal " (French → English) :

TERMINOLOGY
see also In-Context Translations below
calcul des ossatures à moment fléchissant maximal

limit analysis
Génie des matériaux
Materials Engineering


construction à ossature à moment fléchissant maximal

limit design
Construction
Construction
IN-CONTEXT TRANSLATIONS
Ainsi, ladite prise en compte des droits doit intervenir dans le délai maximal de 14 jours à compter du moment où les autorités douanières sont en mesure de calculer le montant des droits et non ultérieurement (notamment à l'issue de la réalisation d'une procédure destinée à assurer les droits de la défense ...[+++]

These duties must be entered in the accounts within 14 days of when the customs authorities are able to calculate the amount of duty and not later (in particular after a procedure to guarantee the debtor’s right of defence); assertion of this right of defence is by no means hindered by the entry in the accounts.


L’exploitant fonde la méthode de calcul sur le taux d’émission de NO maximal susceptible de résulter de la réaction chimique se produisant au moment de l’émission et pendant la période considérée.

The operator shall base the calculation method on the maximum potential emission rate of NO from the chemical reaction taking place at the time and the period of the emission.


Lorsque pour le calcul de SCORR, la manœuvre d'arrêt a été effectuée avec un chargement de 70 à 100 % du port en lourd maximal conformément au point 2.2 de l’instruction de service no 2, il y a lieu de prendre en compte, en vue du calcul de SREF et de SCOND, le déplacement d'eau (DREF = DCOND) qui correspond au chargement existant au moment de l'essai.

When the stopping manoeuvre has been carried out with a load of 70-100 % of the maximum deadweight in accordance with point 2.2 of Administrative instruction No 2 in order to calculate Sstandard the displacement (Dreference = Dactual ) corresponding to the load at the time of the test shall be used for the determination of Sreference and Sactual .


Ainsi, ladite prise en compte des droits doit intervenir dans le délai maximal de 14 jours à compter du moment où les autorités douanières sont en mesure de calculer le montant des droits et non ultérieurement (notamment à l'issue de la réalisation d'une procédure destinée à assurer les droits de la défense ...[+++]

These duties must be entered in the accounts within 14 days of when the customs authorities are able to calculate the amount of duty and not later (in particular after a procedure to guarantee the debtor’s right of defence); assertion of this right of defence is by no means hindered by the entry in the accounts.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
1.4.1. Lorsque la plante de chaque pied est percutée à 6,7 ± 0,1 m/s conformément au point 1.3, le moment fléchissant maximal du tibia autour de l'axe y (My) doit être de 120 ± 25 Nm.

1.4.1. When each ball of the foot is impacted at 6,7 (± 0,1) m/s in accordance with paragraph 1.3, the maximum lower tibia bending momentum about the y-axis (My) shall be 120 ± 25 Nm.


2.4.1. Lorsque la plante de chaque pied est percutée à 6,7 ± 0,2 m/s conformément au point 2.3, le moment fléchissant maximal du tibia autour de l'axe y (My) est compris entre 100 et 140 Nm.

2.4.1. When the ball of each foot is impacted at 6,7 ± 0,2 m/s in accordance with paragraph 2.3, the maximum tibia bending moment about the y-axis (My) shall be between 100 Nm and 140 Nm.


5.2. L'index du tibia est calculé sur la base des moments fléchissants (MX et MY) mesurés conformément aux dispositions du point 5.1 selon la formule suivante:

5.2. The tibia index is calculated on the basis of the bending moments (MX and MY) measured according to paragraph 5.1 by the following expression:




www.wordscope.com (v4.0.br.77)

Calcul des ossatures à moment fléchissant maximal

Date index:2023-05-19 -

Pour agences de traduction et traducteurs - For translation agencies & translators

Paris - Brussels - Montreal - Genève - Luxembourg - Madrid

Wordscope - Professional computer-assisted translation tools (CAT tools)