(2) Open the control valve of the fuel supply and allow approximately 5 minutes for the air to be driven from the fuel line.

7 (1) Open the control valve of the fuel supply and allow approximately 5 minutes for the air to be driven from the fuel line.

(g) where the system is subdivided and has more than one dry valve, the arrangement of the air maintenance device shall be such that, when one dry valve operates, water cannot accumulate in the form of a static head on the other dry valves through the air supply lines;

In case of single ducts, the condensor (evaporator) when cooling (heating), is not supplied with outdoor air, but indoor air.

It also includes any storage reservoirs for the operating medium and the return lines, but not the vehicle's engine (except for the purposes of item 4.1.3) or its drive to the energy source; 1.3.4.1. Energy source means that part of the energy supply which provides the energy in the required form e.g. hydraulic pump, air compressor; 1.3.4.2. Energy reservoir means that part of the energy supply in which the energy provided by the energy source is stored; 1.3.4.3. Storage reservoir means that part of the energy supply in which the operating medium is stored at or near to the atmospheric pressure. 1.4. Steering parameters 1.4.1. Steering control effort means the force applied to the steering control in order to steer the vehicle; 1.4.2. S ...[+++]teering time means the period of time from the beginning of the movement of the steering control to the moment at which the steered wheels have reached a specific steering angle; 1.4.3. Steering angle means the angle between the projection of a longitudinal axis of the vehicle and the line of intersection of the wheelplane (being the central plane of the tyre, normal to the spin axis of the wheel) and the road surface; 1.4.4. Steering forces mean all the forces operating in the steering transmission; 1.4.5 Mean steering ratio means the ratio of the angular displacement of the steering control to the mean of the swept steering angle of the steered wheels for a full lock-to-lock turn; 1.4.6. Turning circle means the circle within which are located the projections onto the ground plane of all the points of the vehicle, excluding the external mirrors and the front direction indicators, when the vehicle is driven in a circle; 1.4.7. Nominal radius of steering control means in the case of a steering wheel the shortest dimension from its centre of rotation to the outer edge of the rim. In the case of any other form of control, it means the distance between its centre of rotation and the point at which the steering effort is applied. ...

3.1.2.In the case of a vehicle authorized to draw trailers of category O3 or O4 fitted with compressed air brakes, when tested with the energy source stopped, the supply line blocked off and a reservoir of 0,5-litre capacity connected to the control line, the pressure at full application of the braking control must be between 6,5 and 8 bar at the coupling head of the supply line and between 6 and 7,5 bar at the coupling head of the control line, irrespective of the load condition of the vehicle.