Boost Your Productivity !Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
ABB
Arbre du rotor
Axe de l'hélice
Axe de l'hélics
BFOR
Budget axé sur les résultats
Budgétisation axée sur la performance
Budgétisation axée sur les résultats
Budgétisation basée sur la performance
Budgétisation basée sur l’activité
Budgétisation des programmes
Choix budgétaire
Doublet contrarotatif
Doublet de propfan
Hélice cimeterre
Hélice supercritique
Hélice supercritique contrarotative
Hélice transsonique
Hélice transsonique contrarotative
PBB
Pompe hélice axiale à axe horizontal
Pompe hélice axiale à axe vertical
Propfan
Propfan contrarotatif
Propulseur à hélices à grande vitesse
RBB
RCB
Rationalisation des choix budgétaires
Soufflante non carénée
Soufflante-hélice
Turbine-hélice à axe vertical
Ventilateur à hélice monté sur axe transversal
Ventilateur à hélice monté sur axe transversale

Translation of "axe de l'hélice " (French → English) :

TERMINOLOGY
see also In-Context Translations below
arbre du rotor | axe de l'hélice

turbine rotational axis
IATE - Mechanical engineering | Electronics and electrical engineering
IATE - Mechanical engineering | Electronics and electrical engineering


pompe hélice axiale à axe vertical

vertical screw pump
IATE - Mechanical engineering
IATE - Mechanical engineering


ventilateur à hélice monté sur axe transversal

cross-shift propeller fan
IATE - ENVIRONMENT | Mechanical engineering
IATE - ENVIRONMENT | Mechanical engineering


ventilateur à hélice monté sur axe transversale

cross-shift propeller fan
génie climatique > ventilation
génie climatique > ventilation


pompe hélice axiale à axe vertical

vertical screw pump
Pompes
Pumps


turbine-hélice à axe vertical

vertical shaft propeller turbine
Génie civil
Civil Engineering


pompe hélice axiale à axe horizontal

horizontal screw pump [ wood screw pump | screw feed pump ]
Pompes
Pumps


axe de l'hélics

screw axis
industrie du cuir
industrie du cuir


hélice transsonique | hélice supercritique | hélice cimeterre | propfan | soufflante-hélice | soufflante non carénée | doublet de propfan | propfan contrarotatif | hélice transsonique contrarotative | hélice supercritique contrarotative | doublet contrarotatif | propulseur à hélices à grande vitesse

propfan | prop-fan | free fan | ultra fan | advanced propeller | single-rotation propfan | unducted fan | UDF | contra-rotating propfan | counter-rotation propfan | counter-rotational propfan | ultra-bypass engine | UBE | ultra-high bypass | UHB
aéronautique > moteur d'aéronef
aéronautique > moteur d'aéronef


choix budgétaire [ ABB | BFOR | budget axé sur les résultats | budgétisation axée sur la performance | budgétisation axée sur les résultats | budgétisation basée sur la performance | budgétisation basée sur l’activité | budgétisation des programmes | PBB | rationalisation des choix budgétaires | RBB | RCB ]

programme budgeting [ ABB | activity-based budgeting | BFOR | budget focused on results | PBB | performance-based budgeting | performance budgeting | planning, programming and budgeting system | PPBS | rationalisation of budget choices | RBB | result-based budgeting ]
24 FINANCES | MT 2436 finances publiques et politique budgétaire | BT1 politique budgétaire | RT analyse coût-bénéfice [4026] | analyse coût-efficacité [4026]
24 FINANCE | MT 2436 public finance and budget policy | BT1 budget policy | RT cost-benefit analysis [4026] | cost-effectiveness analysis [4026]
IN-CONTEXT TRANSLATIONS
les rouleaux de tabac remplis d’un mélange battu et munis d’une cape extérieure, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant, mais non l’embout dans le cas des cigares avec embout, et d’une souscape, toutes deux en tabac reconstitué, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 1,2 gramme et que la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l’axe longitudinal du cigare;

rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar covering the product in full, including, where appropriate, the filter but not, in the case of tipped cigars, the tip, and a binder, both being of reconstituted tobacco, where the unit weight, not including filter or mouthpiece, is not less than 1,2 g and where the wrapper is fitted in spiral form with an acute angle of at least 30° to the longitudinal axis of the cigar;


les rouleaux de tabac munis d'une cape extérieure, de la couleur normale des cigares, et d'une sous-cape, toutes deux en tabac reconstitué, lorsqu'au moins 60 % en poids des particules de tabac ont une largeur et une longueur supérieures à 1,75 millimètre et que la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l'axe longitudinal du cigare;

3. Rolls of tobacco with an outer wrapper of the normal colour of a cigar, and a binder, both being of reconstituted tobacco, where at least 60 % by weight of the tobacco particles are both wider and longer than 1,75 mm and where the wrapper is fitted in spiral form with an acute angle of at least 30° to the longitudinal axis of the cigar;


les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant - mais non l'embout dans le cas des cigares avec embout -, et d'une sous-cape, toutes deux en tabac reconstitué, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 1,2 gramme et que la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l'axe longitudinal du cigare;

3. Rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar covering the product in full, including where appropriate the filter but not in the case of tipped cigars, the tip , and a binder, both being of reconstituted tobacco, where the unit weight, not including filter or mouth-piece, is not less than 1,2 g and where the wrapper is fitted in spiral form with an acute angle of at least 30° to the longitudinal axis of the cigar;


1) À l'article 3, les points 3) et 4) sont remplacés par le texte suivant: "3) les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant - mais non l'embout dans le cas des cigares avec embout -, et d'une sous-cape, toutes deux en tabac reconstitué, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 1,2 gramme et que la cape est apposée en hélice avec un angle aigu minimal de 30 degré ...[+++]

1. Article 3, points 3 and 4, shall be replaced by the following: "3. rolls of tobacco with a threshed blend filler and with an outer wrapper of the normal colour of a cigar covering the product in full, including where appropriate the filter but not in the case of tipped cigars, the tip, and a binder, both being of reconstituted tobacco, where the unit weight, not including filter or mouth-piece, is not less than 1,2 g and where the wrapper is fitted in spiral form with an acute angle of at least 30° to the longitudinal axis of the cigar;


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
"(3) les rouleaux de tabac remplis d'un mélange battu et munis d'une cape extérieure, de la couleur normale des cigares, couvrant entièrement le produit, y compris le filtre le cas échéant mais non l'embout dans le cas des cigares avec embout , et d'une sous-cape, toutes deux en tabac reconstitué, lorsque leur masse unitaire, sans filtre ni embout, est égale ou supérieure à 1,2 gramme et que la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l'axe longitudinal du cigare;

"(3) Rolls of tobacco with a threshed blend filter and with an outer wrapper of the normal colour of a cigar covering the product in full, including where appropriate the filter but not in the case of tipped cigars, the tip, and a binder, both being of reconstituted tobacco, where the unit weight, not including filter or mouth-piece, is not less than 1,2 g and where the wrapper is fitted in spiral form with an acute angle of a least 30° to the longitudinal axis of the cigar;


3) les rouleaux de tabac munis d'une cape extérieure, couleur normale des cigares, et d'une sous-cape, toutes deux en tabac reconstitué, lorsque au moins 60 % en poids des particules de tabac ont une largeur et une longueur supérieure à 1,75 millimètre et lorsque la cape est apposée en hélice avec un angle aigu minimal de 30 degrés par rapport à l'axe longitudinal du cigare;

3. rolls of tobacco with an outer wrapper of the normal colour of a cigar, and a binder, of reconstituted tobacco, where at least 60 % by weight of the tobacco particles are both wider and longer than 1,75 mm and where the wrapper is fitted in spiral form with an acute angle of at least 30 ° to the longitudinal axis of the cigar;




www.wordscope.com (v4.0.br.77)

axe de l'hélice

Date index:2023-12-24 -

Pour agences de traduction et traducteurs - For translation agencies & translators

Paris - Brussels - Montreal - Genève - Luxembourg - Madrid

Wordscope - Professional computer-assisted translation tools (CAT tools)