OBOGS inlet air control valve switch

OBOGS air inlet control valve switch

air intake heating thermostat

(7) In order to achieve EU air quality objectives and to ensure a continuous effort to reduce vehicle emissions, the power to adopt delegated acts in accordance with Article 290 of the Treaty on the Functioning of the European Union (TFUE) should be delegated to the Commission in respect of the detailed rules on the application of Regulation (EC) No 715/2007 to vehicles of categories M1, M2, N1 and N2 with a reference mass exceeding 2 610 kg but with a maximum technically permissible laden mass not exceeding 7 500 kg, the specific pro ...[+++]cedures, tests and requirements for type approval, the requirements for the implementation of the prohibition on the use of defeat devices that reduce the effectiveness of emission control systems, the measures necessary for the implementation of the obligation of a manufacturer to provide unrestricted and standardised access to vehicle repair and maintenance information, the replacement of the information on the mass of CO2 emissions in the certificate of conformity with information on total mass of CO2 emissions equivalents, the increase or removal of the limit value of total hydrocarbons emissions for positive ignition vehicles, the amendment of Regulation (EC) No 715/2007 for the purposes of recalibrating the particulate mass based limit values and introducing particle number based limit values that would correlate broadly with the petrol and diesel mass limit values, the adoption of a revised measurement procedure for particulates and a particle number limit value, a limit value for emissions of NO2 and limits for tailpipe emissions at cold temperatures for vehicles approved as complying with the Euro 6 emission limits.

(b) in the case of ships fitted with oil-fired boilers, full particulars of the proposed fire smothering installations, foam, steam or gas, as the case may be, for the boiler rooms, showing the distribution system, screens and coamings, the position of the controls for the installations and the arrangements for closing openings to prevent the admission of air;

Compliance with the OBD stage I requirements requires that if fuel delivery, spark delivery or intake air are electronically controlled, the applicable input and/or output circuits need to be monitored, limited to the items listed in Appendix 2 to Annex XII. If for example a motorcycle would be equipped with a mechanically actuated carburettor, but at the same time with electronically controlled spark delivery, the primary ignition coil circuits need to be monitored.

2.6. The manufacturer shall declare that manufacturer-facilitated modifications of the following characteristics will not increase the propulsion unit performance exceeding the conformity of production boundaries set out in point 4.1.4 of Annex IV: spark delivery of the ignition system if applicable, fuel feed and delivery system, air intake system including air filter(s) (modification or removal), propulsion battery configuration or electric power to the electric motor(s) if applicable, the drive train and the control unit(s) that control the powertrain of the vehicle.