devices using a Listen Before Talk (LBT) mechanism, as described in the harmonised standard EN 302 498-2, are permitted to operate in frequency ranges 2,5 to 2,69 and 2,9 to 3,4 GHz with a maximum mean power spectral density of – 50 dBm/MHz,

The load figures are percentage values of the torque corresponding to the prime power rating defined as the maximum power available during a variable power sequence, which may be run for an unlimited number of hours per year, between stated maintenance intervals and under the stated ambient conditions, the maintenance being carried out as prescribed by the manufacturer.

7. Considers that, to obtain a licence to perform experiments on animals, the applicant must be able clearly to substantiate and justify the purpose of the experiment in terms of the criterion that the experiments will be of benefit to animals or humans. In addition, a licence may be issued only where the applicant can show that the desired outcome can only be achieved by using live animals and that there are no alternative testing methods. Before a licence is issued, an ethical and animal-welfare assessment must be carried setting limits to the level of stress to which the animals may be subjected. Even if it can be shown that certain e ...[+++]xperiments may be of benefit to animals or humans, they should not be authorised if the stress on the animals used in the experiment exceeds the maximum level;

The load figures are percentage values of the torque corresponding to the prime power rating defined as the maximum power available during a variable power sequence, which may be run for an unlimited number of hours per year, between stated maintenance intervals and under the stated ambient conditions, the maintenance being carried out as prescribed by the manufacturer.

P M is the maximum observed or declared power at the test speed under the test conditions (see Appendix 2 of Annex VII) [kW]

4. A manufacturer may, for SI engines with a power output of not more than 19 kW for stage II, on a voluntary basis, use the alternative type approval procedure described in Annex XII to this Directive”.