EUROPA - EU law and publications - EUR-Lex - EUR-Lex - 32008R0692 - EN - Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance) - COMMISSION REGULATION - (EC) No 692/2008 // of 18 July 2008 // implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with ...[+++]respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information // ADMINISTRATIVE PROVISIONS FOR EC TYPE-APPROVAL // Appendix 1 // Verification of conformity of production — First statistical method // Appendix 2 // Verification of conformity of production — Second statistical method // Appendix 3 // MODEL // INFORMATION DOCUMENT No . // Appendix to information document // INFORMATION ON TEST CONDITIONS // Appendix 4 // MODEL OF EC TYPE-APPROVAL CERTIFICATE // (Maximum format: A4 (210 × 297 mm)) // Addendum to EC type-approval certificate No . // concerning the type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information according to Regulation (EC) No 715/2007 // Appendix 5 // Vehicle OBD information // Appendix 6 // EC Type –Approval Certification Numbering System // Appendix 7 // IN-SERVICE CONFORMITY // IN-SERVICE CONFORMITY CHECK // STATISTICAL PROCEDURE FOR IN-SERVICE CONFORMITY TESTING // RESPONSIBILITIES FOR IN-SERVICE CONFORMITY // VERIFYING AVERAGE EXHAUST EMISSIONS AT AMBIENT CONDITIONS // (TYPE 1 TEST) // EMISSIONS DATA REQUIRED AT TYPE-APPROVAL FOR ROADWORTHINESS PURPOSES // MEASURING CARBON MONOXIDE EMISSION AT IDLING SPEEDS // (TYPE 2 TEST) // MEASUREMENT OF SMOKE OPACITY // VERIFYING EMISSI ...

However, when applying for type-approval, manufacturers shall present to the approval authority with information showing that the NOx aftertreatment device reaches a sufficiently high temperature for efficient operation within 400 seconds after a cold start at –7 °C as described in the Type 6 test.

Where applications are made for type-approval of trailers fitted with inertia braking systems, such applications are to be accompanied by the test reports relating to the control system and the brakes, as well as the test report on the compatibility between the inertia control device, the transmission and the brakes on the trailer; these reports are to include at least the particulars shown in Appendices 2, 3 and 4 to this Annex.

Where applications are made for type approval of trailers fitted with inertia brakes, such applications are to be accompanied by the test reports relating to the control system and the brakes, as well as the test report on the compatibility between the inertia control device, the transmission and the brakes on the trailer ; these reports are to include at least the particulars shown in Appendices 2, 3 and 4 to this Annex.

Appendix 4 Test report on the compatibility of the inertia control device, the transmission and the brakes on the trailer

On Point D, the impact of electronic aids to navigation, an unfortunate consequence of automation and de-staffing was the destruction of many significant light station buildings, keeper's dwellings, old fog alarm buildings and sheds, as well as the loss of rare optics and equipment.